No-Dig Sewer Lining in South Tampa | CIPP Install Vlog
In this exciting plumbing vlog, we take you behind the scenes of a real-world job in South Tampa, where we install two CIPP (Cured-In-Place Pipe) sewer liners. This trenchless technology allows us to restore an aging underground pipe system without the hassle of digging up the yard. Join us as we share the process step-by-step, showcasing how we save time, money, and mess while ensuring quality work.
Key Takeaways
CIPP (Cured-In-Place Pipe) technology is a trenchless method for repairing sewer lines.
The process involves inserting a liner into the existing pipe, which is then cured to create a new pipe within the old one.
Proper preparation and planning are crucial for a successful installation.
The Journey Begins
Hey, what's good everybody? It’s your boy Ricky the plumber. I’m currently fighting that famous Tampa Sun Coast traffic on my way to a job. It’s backed up, and I’ve got another 40 minutes to go just to cover 22 miles. Not ideal, but hey, that’s part of life.
On this plumbing vlog, we show the good, the bad, and the ugly—like this traffic. But let’s get into the job!
Arriving at the Job Site
We just pulled up to the job, and I can see my crew, Jason and Avery, already hard at work. They’ve prepped the first liner and are ready to go.
Jason has his camera in the line, pulling the mule tape through the sewer line we’re going to be lining. Avery is in the pit, feeding the mule line. This is how we insert our liner into the line. The mule tape helps pull the liner through, making the process smoother.
The Liner Process
We’re using our exclusive blue coating because we’re authorized New Flow installers. We applied a second coat yesterday, and it looks beautiful. High-quality work, folks!
Avery is doing a great job feeding the line. It’s all about teamwork here. We even joked about going live on YouTube, but let’s be real—who would watch a long video of us working?
Competition Time
Now it’s my turn to do the air end since Avery just did the pull end. We decided to have a little competition to see who can do it better. Spoiler alert: I beat Avery by 30 seconds, but it’s not like that’s a huge win.
We had a little fun with a moth that got into the line. Sorry, Mr. Moth, but you’re not making it out of here alive!
Testing the Liner
Next up, we need to test the liner. We pump it up to 15 PSI to check for leaks. This is a crucial step to ensure everything is sealed properly. We let it sit for about 15 minutes to make sure there are no issues.
Once that’s done, we mix up our epoxy to get ready for the liner installation.
Installing the Liner
With everything prepped, we installed the liner into the line. Now, we have to wait a couple of hours for it to cure. The liner is pressurized at 15 PSI, and we can see the bladder expanding. It’s a satisfying sight!
The Cure Time
After a few hours, we’ll pull the bladder and move on to our next liner. It’s a waiting game now, but it’s all part of the process.
Wrapping Up the Day
Today, we installed two 4-inch liners, totaling about 40 feet. The second liner will sit in the sewer line overnight to cure. Tomorrow, we’ll pull it and do a final camera inspection.
I love doing these liners. They might look simple on camera, but there’s a lot of prep work involved. Planning, scheduling, and making sure everything is done when the clients aren’t home are all part of the job.
It’s important to do these jobs right so our clients don’t have issues down the road. I’m happy to say everything has gone great so far, and I’m looking forward to the next job.
Catch you all on the flip side! Peace.
