Using a Small Hydro-Jetter to Unclog a Kitchen Waste Arm: Hot Water, a Marked Hose, and a Camera Check
I'm Ricky Cox, master plumber with Sewer Studs Plumbing & Drain. Kitchen drains have a pesky problem: excessive grease buildup. What you can see stuck inside the P-trap is pretty much the tip of the iceberg when it comes to the amount of buildup that will be in the drains.
This video clears a clogged kitchen waste arm with a small hydro-jetter — the little guy we keep on the truck. Jetting scours the pipe walls clean instead of just poking a hole through the clog the way a cable can, and because the machine is small, you don't have to wait two or three days for somebody to show up with a big giant jetting machine in your front yard, bothering your neighbors. With this one, we only get to bother your dogs and cats.
Step One: Prime the Unit and Set the Jetter in the Drain
We've already got the jetter set up in the drain when this video starts, and we've already taken care of priming the unit. The nozzle on the end helps get the jetter to go all the way around in tight corners and everything — a kitchen waste arm has turns in it, and the jetter has to make those turns to do its work.
Step Two: Mark the Hose Before You Run It
Before the water goes on, we mark the hose so we know how far it can come back out. The reason is simple: you don't want to end up cutting yourself with the high-pressure water when you pull it out too far. Mark it, find the spot that should be safe, and that mark is your stop line while you're working the hose back.
Step Three: Jet With Hot Water
Water on — and we're jetting with hot water. Hot water is going to help break the grease up even a little bit easier as well. You can actually feel the water running through the pressure hose while it works.
Then the jetter does what it does: working back and forth through the waste arm, scouring the grease off the pipe walls instead of just opening a path through the middle of it. A cable through grease can close back up; a jetted line has the buildup washed off the walls.
And yes — this step is why we use drop cloths.
Step Four: Camera the Line and Prove It's Clear
Turn the water off, and just like that, we get the drain camera out and run the camera through, just to make sure that all the buildup is out. The camera is the proof: not "it drains better," but a look inside the pipe showing the grease is gone.
Then you don't have to worry about clogging up your drains anymore — unless you're pouring hamburger grease down there.
Why a Small Jetter Fits a Kitchen Line
A kitchen waste arm is a small branch line, and the clog in it is usually grease and food buildup that has been narrowing the pipe over time. The small jetter matches that job: it's on the truck, it sets up at the drain, its nozzle works around the tight corners, and hot water helps it cut the grease. Our hydro-jetting 101 guide covers the full-size version of the same idea — when jetting beats cabling on bigger lines — and our hydro-jetting service page covers how we jet drains across Tampa Bay.
For the smaller drains a cable machine handles, the tool care matters just as much: our RIDGID K-45 cleaning and lubrication guide shows the takedown that keeps a small drain machine ready. A stubborn double-sink kitchen drain gets its own walkthrough in the double-sink drain fix, and when the wrong material gets into a line, the grout and concrete removal post shows what a drain can be up against. For kitchen clogs generally, start with our drain cleaning page.
Frequently Asked Questions
Why does grease in the P-trap mean there's more buildup in the drain?
Because what is stuck inside the P-trap is only pretty much the tip of the iceberg. Grease and food buildup choke kitchen lines over time, coating the waste arm past the trap — which is why clearing the trap alone doesn't finish the job.
Why use a hydro-jetter on a kitchen waste arm instead of a cable?
Jetting scours the pipe walls clean instead of just poking a hole through the clog like a cable can. A hole poked through grease can close back up; a jetted line has the buildup washed off the walls.
Why jet with hot water?
Hot water helps break the grease up a little bit easier while the jetter works. Grease is the clog in a kitchen line, and heat works on grease.
Why mark the hose before jetting?
So you don't pull it out too far and end up cutting yourself with the high-pressure water. The mark is the safe stop line while you're working the hose back out of the drain.
How do you know the buildup is actually gone?
Run the drain camera through the line after jetting and look. The camera check is how we make sure all the buildup is out instead of guessing from how the drain runs.
Does the small jetter really clear a kitchen line without a big machine?
Yes — that's the point of keeping it on the truck. It sets up right at the drain, its nozzle goes around the tight corners of a waste arm, and there's no big giant jetting machine sitting in your front yard.
Kitchen Drain Clogged With Grease?
If your kitchen sink drains slow, gurgles, or keeps clogging back up, we'll give you a straight answer and a firm quote. Call Sewer Studs Plumbing & Drain at (813) 680-2284, Monday through Friday, 8 AM to 5 PM. We serve homeowners across Tampa Bay — see our Tampa plumber page.